Skip to content

Free written estimatesLocal crews

New wood privacy fence beside a stucco house under tropical palms

Older lots, big trees and design review

Fence contractor in Coral Gables, FL

Wood, vinyl, aluminum, chain link and gate work for Coral Gables yards. Send a few photos and the length you have in mind, and we confirm availability.

  • Posts and hardware chosen for wind, wet ground and salt air
  • Written quotes before work starts
  • Wood, vinyl, chain link, aluminum, iron and gates

What Coral Gables yards usually ask for

Many Coral Gables streets were laid out in the 1920s, with Mediterranean Revival houses, deep front lawns and a thick canopy of banyan, live oak and mahogany trees. Fence requests here are rarely about a blank rectangle of grass. They are about a boundary that has to suit an older house, work around mature roots and still look like it belongs on the street.

Typical calls include a replacement for a leaning back-yard fence, a new pool barrier, a gate for a side yard, or a quiet privacy line between two lots that sit close together. We start by asking about the trees, the house style and where the property line actually runs.

Banyan roots, deep lots and the view from the street

Large trees are the first thing to plan around. Banyan and live oak roots spread wide and can lift a concrete footing or push a post out of line over the years, so we look at where the roots run before marking post positions. Sometimes the answer is to shift the line a little. Sometimes it is a different post spacing.

Roads such as Ponce de Leon Boulevard and Coral Way carry steady traffic, but most of the neighborhood is quiet and leafy. Falling branches and leaf litter are a regular source of damage to fence tops and gates. Houses often sit well back from the street, so a front or side gate is a visible feature of the property, not just a utility item.

Fence styles we install for Coral Gables properties

We serve Coral Gables with every service on this site, matched to older homes and shaded yards.

  • Wood privacy fencing for back yards that need screening from a close neighbor, built with lumber suited to termite country.
  • Vinyl fencing for owners who want a clean white look without repainting in humid shade.
  • Aluminum and ornamental iron for front boundaries and pool enclosures, where an open design suits the architecture.
  • Chain link for dog runs, utility corners and service areas that sit out of sight.
  • Repairs and gate automation for leaning sections, rotted posts and driveway gates that need an opener.

Price depends on a short list of factors, and the estimate should name them. In Coral Gables the common ones are the length and height, the material, how many gates are needed, and how hard it is to reach the line with tools and a post-hole digger.

  • Access. Narrow side yards, mature hedges and low branches slow the work and can mean hand digging.
  • Roots and rock. Shallow limestone and big roots both change how footings are set.
  • Old fence removal. Taking out a rotted fence and hauling it away is its own line of work.
  • Finish. Stain, paint, powder coat and hardware all vary.

Permits, city design standards and your neighbors

Fences in Miami-Dade are usually permitted, and Coral Gables has its own zoning and design standards. A fence that faces the street can be looked at more closely than one tucked behind the house, and some historic or landmark properties have extra steps. Ask the city building department what applies to your address, and tell us if you already have a survey.

Before any digging, Florida requires a call to Sunshine 811 so buried lines can be marked. It is also worth speaking to the neighbor on the other side. A short conversation about who maintains which face of the fence avoids awkward moments later.

How a Coral Gables quote request works

Use the quote form or call (305) 555-0128. We serve Coral Gables from outside the city, so your request is how we confirm availability for your street and the timing you have in mind.

  1. Tell us the approximate length, the height you want and the material you are leaning toward.
  2. Mention trees close to the line, a pool, or an existing fence that needs to come out.
  3. Add two or three photos of the line from different angles.
  4. We reply with questions, then arrange a visit to measure and look at the ground.
  5. You receive a written quote that lists materials, gates and what is included.

Reading the quote is free, and there is no obligation to go ahead.

Get a quote in Coral Gables

Tell us what you need and we call you back.

Step 1 of 3

What do you need?

No obligation.

Questions about Coral Gables

Can a fence be built close to a large banyan or oak tree?

Often yes, but the design changes. Roots can lift footings and stress posts, and cutting major roots can harm the tree. We look at where the roots run, then shift post positions, adjust spacing or use a different footing. In some cases an arborist should be consulted before digging begins. We will tell you if we think the tree needs a professional look.

Does a fence in Coral Gables need a permit?

Most new fences in Miami-Dade need one, and the city has its own standards for height, materials and fences that face the street. Requirements can differ for historic properties. We explain what your job is likely to need and help with the paperwork, but the city building department makes the final call, so it is worth confirming early.

What fence suits an older Mediterranean style house?

Many owners choose aluminum or ornamental iron for the front, since the open look keeps sight lines to the house. For the back yard, wood or vinyl gives privacy. The right pick depends on the architecture, the shade and what the neighbors have. A few photos of the house and street help us suggest options that look at home.

My old wood fence is leaning after storms. Repair or replace?

If only a few posts or boards have failed and the rest is sound, a repair can make sense. If the posts are rotted at the base, or termites have damaged the framing, patching tends to be a short-term fix. We check the posts first, because they decide how long the rest of the fence will last.

Can you add an automatic opener to an existing driveway gate?

In many cases yes. The gate needs to swing or slide freely, hang level and be strong enough to carry the operator. Safety sensors are a normal part of the setup. We look at the posts, hinges and ground first, then explain whether the gate is ready or needs repair before an opener goes on.

Ready when you are

Call now or request a quote online.

(305) 555-0128